<p id="vpzpx"></p>

        <menuitem id="vpzpx"></menuitem>

            <ins id="vpzpx"></ins>
            <ins id="vpzpx"><video id="vpzpx"><mark id="vpzpx"></mark></video></ins>



            Contact us

            Yingkou Jinhua Machinery Manufacture Co.,Ltd.

            Contact: Ms. Lu

            Postcode: 115000

            Phone: 0417-2611139

            Fax: 0417-2639111

            Email: ykjinhua@hotmail.com

            Sales Hotline: 18841716688

            Website: www.reelhousefm.com/en

            Address: 114#west,third floor,zhanqian district,yingkou city,liaoning provine

            Operating rules for large tire changer

            Your current location: Home >> News >> company news

            Operating rules for large tire changer

            Date of issue:2019-03-29 Authors: Click:

            The operating procedures for large tire changers are as follows:

            1. The power supply of the tire machine must be in the normal state, and the power supply is in the off position in the non-working state. The air pressure of the internal machine is at the normal pressure, and the air pipe is not connected in the non-working state.

            2. Before replacing the tire, check whether the tire frame is deformed, and the air valve is not leaking or cracking. Price of tire chopping machine 3. Unscrew the air valve to release the tire pressure, place the tire in the middle of the compression arm, and operate the compression arm to separate the two sides of the tire from the wheel frame.

            4. Operate each switch to remove the anti-tire.

            5. When the new tire is installed, the tire Peugeot is up. Operate each switch to install the tire.

            6. After assembly, the switches are placed in the off position.

            The website of this article:http://www.reelhousefm.com/en/news/362.html